Intel Lan Nineveh Driver For Mac

Intel Lan Nineveh Driver For Mac Rating: 5,0/5 3399 votes
  1. Intel Lan Driver Download
  2. Intel Lan Nineveh Driver For Mac

Hi, I’m HW engineer from Advantech corp. And my case used intel crystal forest platform, which is integrated four MACs.

Otherwise, this case also used a I210-AT LAN controller. And there is no problem that the four MACs and one I210 LAN under Win 7 oS. But under the fedora 16 OS, there is a strange issue for both using MACs and LAN.

From the platform SW note, I know that the MACs’ driver has integrated into fedora 16 OS, and no special driver to install for them. So I only need to install the I210-AT driver, but after I installed the I210 driver, the four MACs can’t work now. The MACs can work normally before the I210 driver is installed. I check the MACs driver version after I install I210 driver, and the MAC driver seems updated to same version as I210 BTW, the I210 driver version I install is igb-5.0.6, which is downloaded from intel download website, and the MACs default driver version is igb-3.0.6. I verify this issue with I210 previous version igb-4.0.17 which is also released by intel official web, there is no this problem. Could you please help check this issue?

Please supply the output from 'lspci -vvv' as well as 'ifconfig -a'. That will tell us which of our devices are in the system. When you use the term 'MACs' below do you mean the 4 Ethernet ports on the motherboard? Cheers, John -Original Message- From: Evan.Wang(王维) mailto:Evan.Wang@.

Sent: Monday, November 11, 2013 7:00 PM To: e1000-devel@. Cc: Jacques.Wu(敦弘) Subject: E1000-devel DH8900 MAC and I210-AT LAN driver conflict HiI’m HW engineer from Advantech corp. And my case used intel crystal forest platform, which is integrated four MACs.

Otherwise, this case also used a I210-AT LAN controller. And there is no problem that the four MACs and one I210 LAN under Win 7 oS. But under the fedora 16 OS, there is a strange issue for both using MACs and LAN. From the platform SW note, I know that the MACs’ driver has integrated into fedora 16 OS, and no special driver to install for them. So I only need to install the I210-AT driver, but after I installed the I210 driver, the four MACs can’t work now.

The MACs can work normally before the I210 driver is installed. I check the MACs driver version after I install I210 driver, and the MAC driver seems updated to same version as I210 BTW, the I210 driver version I install is igb-5.0.6, which is downloaded from intel download website, and the MACs default driver version is igb-3.0.6. I verify this issue with I210 previous version igb-4.0.17 which is also released by intel official web, there is no this problem. Could you please help check this issue? Thanks Evan. Hi John, The platform contains 4 internal MACs(DH8900), and I match them with 4 external PHYs( Marvell 88E1112). Besides, one I210 LAN base on PCIEx1 port is another LAN device.

Intel gigabit lan drivers

So on my board, there are 5 Ethernet device in all. Thanks Evan -邮件原件- 发件人: Ronciak, John mailto:john.ronciak@.

发送时间: 2013年11月12日 12:12 收件人: Evan.Wang(王维); e1000-devel@. 抄送: Jacques.Wu(敦弘) 主题: RE: DH8900 MAC and I210-AT LAN driver conflict Please supply the output from 'lspci -vvv' as well as 'ifconfig -a'. That will tell us which of our devices are in the system. When you use the term 'MACs' below do you mean the 4 Ethernet ports on the motherboard? Cheers, John -Original Message- From: Evan.Wang(王维) mailto:Evan.Wang@. Sent: Monday, November 11, 2013 7:00 PM To: e1000-devel@. Cc: Jacques.Wu(敦弘) Subject: E1000-devel DH8900 MAC and I210-AT LAN driver conflict HiI’m HW engineer from Advantech corp.

And my case used intel crystal forest platform, which is integrated four MACs. Otherwise, this case also used a I210-AT LAN controller. And there is no problem that the four MACs and one I210 LAN under Win 7 oS. But under the fedora 16 OS, there is a strange issue for both using MACs and LAN. From the platform SW note, I know that the MACs’ driver has integrated into fedora 16 OS, and no special driver to install for them.

So I only need to install the I210-AT driver, but after I installed the I210 driver, the four MACs can’t work now. The MACs can work normally before the I210 driver is installed. I check the MACs driver version after I install I210 driver, and the MAC driver seems updated to same version as I210 BTW, the I210 driver version I install is igb-5.0.6, which is downloaded from intel download website, and the MACs default driver version is igb-3.0.6. I verify this issue with I210 previous version igb-4.0.17 which is also released by intel official web, there is no this problem. Could you please help check this issue? Thanks Evan.

Where is the output from the calls I asked you for? Please attach the output. Cheers, John -Original Message- From: Evan.Wang(王维) mailto:Evan.Wang@. Sent: Monday, November 11, 2013 8:32 PM To: Ronciak, John; e1000-devel@. Cc: Jacques.Wu(敦弘) Subject: 答复: DH8900 MAC and I210-AT LAN driver conflict Hi JohnThe platform contains 4 internal MACs(DH8900), and I match them with 4 external PHYs( Marvell 88E1112). Besides, one I210 LAN base on PCIEx1 port is another LAN device. So on my board, there are 5 Ethernet device in all.

Intel Lan Driver Download

Thanks Evan -邮件原件- 发件人: Ronciak, John mailto:john.ronciak@. 发送时间: 2013年11月12日 12:12 收件人: Evan.Wang(王维); e1000-devel@. 抄送: Jacques.Wu(敦弘) 主题: RE: DH8900 MAC and I210-AT LAN driver conflict Please supply the output from 'lspci -vvv' as well as 'ifconfig -a'. That will tell us which of our devices are in the system. When you use the term 'MACs' below do you mean the 4 Ethernet ports on the motherboard?

CheersJohn -Original Message- From: Evan.Wang(王维) mailto:Evan.Wang@. Sent: Monday, November 11, 2013 7:00 PM To: e1000-devel@. Cc: Jacques.Wu(敦弘) Subject: E1000-devel DH8900 MAC and I210-AT LAN driver conflict HiI’m HW engineer from Advantech corp.

And my case used intel crystal forest platform, which is integrated four MACs. Otherwise, this case also used a I210-AT LAN controller. And there is no problem that the four MACs and one I210 LAN under Win 7 oS. But under the fedora 16 OS, there is a strange issue for both using MACs and LAN.

Intel

From the platform SW note, I know that the MACs’ driver has integrated into fedora 16 OS, and no special driver to install for them. So I only need to install the I210-AT driver, but after I installed the I210 driver, the four MACs can’t work now. The MACs can work normally before the I210 driver is installed. I check the MACs driver version after I install I210 driver, and the MAC driver seems updated to same version as I210 BTW, the I210 driver version I install is igb-5.0.6, which is downloaded from intel download website, and the MACs default driver version is igb-3.0.6.

Intel

I verify this issue with I210 previous version igb-4.0.17 which is also released by intel official web, there is no this problem. Could you please help check this issue?

Thanks Evan.

Advertisements or commercial links. Intel pro/wireless 2011b lan 3a mini pci adapter.

All information provided is subject to change at any time, without notice. Intel may make changes to manufacturing life cycle, specifications, and product descriptions at any time, without notice. The information herein is provided 'as-is' and Intel does not make any representations or warranties whatsoever regarding accuracy of the information, nor on the product features, availability, functionality, or compatibility of the products listed. Please contact system vendor for more information on specific products or systems. The Recommended Customer Price (“RCP”) is pricing guidance for Intel products. Prices are for direct Intel customers, typically represent 1,000-unit purchase quantities, and are subject to change without notice. Taxes and shipping, etc.

Not included. Prices may vary for other package types and shipment quantities, and special promotional arrangements may apply. If sold in bulk, price represents individual unit. Listing of these RCP does not constitute a formal pricing offer from Intel.

Intel Lan Nineveh Driver For Mac

Please work with your appropriate Intel representative to obtain a formal price quotation. System and Maximum TDP is based on worst case scenarios. Actual TDP may be lower if not all I/Os for chipsets are used.

Posted on